- Internal Micrometer / Bore Gauge
- Concentricity Gage
- Bench Centre
- Digital Depth Gauge / Depth Caliper
- Digital Calipers
- Go No Go Thread Plug and Ring Gauge
- Master Gear and Spline Gauge
- METRO Digital Display Unit
- Thread Depth Gauge
- ORFEO Packer Measure Block
- TAMLOT Keyway Gauge
- Coating Thickness Gauge
- Metrology Casting Material
- Portable Hardness Tester
- Surface Roughness Tester
Bowers MicroGauge 2 Point Bore Gauge
|
Bowers MicroGauge 2 Point Bore Gauge |
MicroGauge with Depth Stop
MicroGauge with Stand
MicroGauge with USB Data Output
MicroGauge Display
MicroGauge Cone
MicroGauge Individual Head 1 - 10mm
MicroGauge 2 Point Bore Gauge 1 - 6mm Set
|
|
The Bowers MicroGauge 2-point bore gauging system has been designed specifically for the measurement of small bores between 1.0-10.0mm. Featuring a digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument.
The digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time.
The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output.
The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings.
Like all Bowers bore gauging products the MicroGauge system is available as individual instruments or as full sets.
All setting rings are supplied as standard with UKAS certification.
• System range: 1-10mm
• Slimline digital display
• Switchable resolution 0.01/0.001/0.0005mm
• Simple 2-button operation
• Clear LCD display
• Data output: RS232 / USB proximity sensor
• Linearity: Diameter 1.0-1.5 max 2% of measuring travel, min 0.001mm.
Diameter 1.5-10 max 1% of measuring travel, min 0.001mm
• Repeatability: 0.001mm
• Available as individual instruments or sets
• UKAS-certificates as standard with all setting rings
• Hard-chromed ball-contacts
• Depth-stops available
• Stand available as an option
Individual Gauge with Setting Ring
| Code No. | Range (mm) | Range (inch) | Measuring Depth (mm) | Setting Ring (mm) |
| MG011W | 0.95-1.15 | 0.037-0.045 | 0.6-11 | 1 |
| MG012W | 1.07-1.25 | 0.042-0.049 | 0.6-11 | 1.1 |
| MG013W | 1.17-1.35 | 0.046-0.053 | 0.6-11 | 1.2 |
| MG014W | 1.27-1.45 | 0.050-0.057 | 0.6-11 | 1.3 |
| MG015W | 1.37-1.55 | 0.054-0.061 | 0.6-11 | 1.4 |
| MG016W | 1.50-1.90 | 0.059-0.075 | 0.9-17 | 1.75 |
| MG017W | 1.80-2.20 | 0.071-0.087 | 0.9-17 | 2 |
| MG018W | 2.05-2.45 | 0.081-0.096 | 0.9-17 | 2.25 |
| MG019W | 2.25-2.75 | 0.089-0.108 | 1.2-22 | 2.5 |
| MG020W | 2.50-3.00 | 0.098-0.118 | 1.2-22 | 2.75 |
| MG021W | 2.75-3.25 | 0.108-0.128 | 1.2-22 | 3 |
| MG022W | 3.00-3.50 | 0.118-0.138 | 1.2-22 | 3.25 |
| MG023W | 3.25-3.75 | 0.128-0.148 | 1.2-22 | 3.5 |
| MG024W | 3.50-4.00 | 0.138-0.157 | 1.2-22 | 3.75 |
| MG025W | 3.75-4.25 | 0.148-0.167 | 1.2-22 | 4 |
| MG026W | 3.65-4.35 | 0.144-0.171 | 2.0-40 | 4 |
| MG027W | 4.15-4.85 | 0.163-0.191 | 2.0-40 | 4.5 |
| MG028W | 4.65-5.35 | 0.183-0.211 | 2.0-40 | 5 |
| MG029W | 5.15-5.85 | 0.203-0.230 | 2.0-40 | 5.5 |
| MG030W | 5.65-6.35 | 0.222-0.250 | 2.0-40 | 6 |
| MG031W | 6.15-6.85 | 0.242-0.270 | 2.0-40 | 6.5 |
| MG032W | 6.65-7.35 | 0.262-0.290 | 2.0-40 | 7 |
| MG033W | 7.15-7.85 | 0.281-0.309 | 2.0-40 | 7.5 |
| MG034W | 7.65-8.35 | 0.301-0.329 | 2.0-40 | 8 |
| MG035W | 8.15-8.85 | 0.321-0.349 | 2.0-50 | 8.5 |
| MG036W | 8.65-9.35 | 0.340-0.368 | 2.0-50 | 9 |
| MG037W | 9.15-9.85 | 0.360-0.388 | 2.0-50 | 9.5 |
| MG038W | 9.65-10.35 | 0.380-0.408 | 2.0-50 | 10 |
Sets
| Code No. | Range (mm) |
| SMG010M | 0.95-2.45 |
| SMG011M | 1.50-4.25 |
| SMG012M | 2.25-6.35 |