- Internal Micrometer / Bore Gauge
- Concentricity Gage
- Bench Centre
- Digital Depth Gauge / Depth Caliper
- Digital Calipers
- Go No Go Thread Plug and Ring Gauge
- Master Gear and Spline Gauge
- METRO Digital Display Unit
- Thread Depth Gauge
- ORFEO Packer Measure Block
- TAMLOT Keyway Gauge
- Coating Thickness Gauge
- Metrology Casting Material
- Portable Hardness Tester
- Surface Roughness Tester
Bowers Air Gauging
|
Bowers Air Gauging |
PC-2200 Air Electronic Column
D400S Multifunctional and Multichannel Display
Air Gauge Applications - Out Of Roundness
Air Gauge Applications - Averages
Air Gauge Applications - Straightness
Air Gauge Applications - Groove Width
Air Gauge Applications - Squareness
Air Gauge Applications - Inside and Outside Diameters
|
|
Bowers Air Gauging is a fast, user friendly method of providing high precision results in even the most challenging of shop-floor environments. Using air
flow volumes and pressures to measure parts, Air Gauging is a reliable, repeatable technology well suited for applications that demand submicron
precision tolerancing.
Bowers Air Gauging technology is flexible; enabling measurement of not only dimensions, but geometric and relational characteristics, such as squareness, parallelism, ovality, taper and straightness.
Bowers Air Gauging technology is flexible; enabling measurement of not only dimensions, but geometric and relational characteristics, such as squareness, parallelism, ovality, taper and straightness.
The working range of our standard air gauge tooling is 0.08mm. For optimum accuracy, Bowers produce the Setting Masters at the Upper and
Lower product limits.
Air / Electronics Columns
(1) Additional parts / software required. (2) 1000 measurements. Download to Flash Drive via USB.
Bowers Air1/2 Features
D400S – Mulitfunctional Multichannel Features
Air / Electronics Columns
| AEP 2045 | PC2200 | |
| Display Type | Tri-clolour bar / Digital numeric | Tri-clolour bar / Digital numeric |
| User Interface | Keypad | Keypad or remote program (1) |
| Channels | 1 | 1 or 2 depending on model |
| Memory Capability | 16 Tooling Characteristics | 4 Tooling Characteristics |
| Resolution | Up to 0.0001mm | Up to 0.0001mm |
| Relative/Absolute | REL/ABS | REL/ABS |
| Measuring Mode | Static/Dynamic/TIR | Static/Dynamic/TIR |
| Units | mm or inch | mm or inch |
| Direct RS232 | Yes | Yes |
| Data Collection | On board (2) | External |
| Connectivity | USB | RS232 |
| Display Options |
Tri-clolour bar /
Digital Numeric Tolerance + Approach
|
Tri-clolour bar / Digital Numeric Tolerance + Approach |
| Auto Channel Recognition | No | No |
| Grading | Yes | Yes |
| Dimension (mm) (HxWxD) | 500x60x200 | 450x57x215 |
| Weight Approx (kg) | 4.7 | 5 |
| Power Requirements | 230 VAC 50Hz | 110/220 VAC 50Hz |
Bowers Air1/2 Features
- TFT colour touch screen display 4,3'', resolution 480x272
- Static or dynamic measurements (Max, Min, Max-Min Average, Median)
- Analogue or digital display
- 1 or 2 measurement configurations (2 characteristics)
- Possibility to select automatically the characteristic by using the air gauge or by touching the screen
- Relative or absolute display
- Display resolution (up to 0.1μm)
- Metric (mm or μm) or Imperial (Inches) measurement or DMS
- Classification/Grading: Up to 16 classes with colour representation
- RS232 port for communication with a PC
- USB port for communication and/or power supply
- USB Stick for data saving on a CSV file
- Optional connection of M-Bus modules
- Measurement transfer by pressing a key, footswitch input or retro-command on the RS232 port
- Operating temperature: +15°C to +30°C
- Power supply from 85 to 265 VAC by using the supplied main transformer (or by connecting it directly on your PC USB port, or through the 24 VDC screw terminal
- Relative humidity: maximum 80%
- Dimensions: width 130mm, height 111mm, depth 105mm
- Mass: 600g (700g with the power supply)
The D400S allows users to display readings simultaneously
from multigauging applications. All of which offers readings for each
dimension, the MIN, MAX and DELTA.
- 7'' touchscreen display and customizable display interface
- Aluminium body
- 12VDC/30VDC Power supply
- RJ-45 Ethernet TCP4
- USB host (for usb key) and USB device (virtual keyboard)
- Footswitch
- M-BUS
- RS232
- Static and dynamic (Mini, Maxi, Maxi-mini, Average, Median)
- Trigonometrical measurements
- Analogical and digital display
- Manage up to 32 fixtures with automatic fixture detection by probe motion
- Up to 32 characteristic by fixture
- Up to 128 part references
- Calibration mode
- Individual probe display
- Displays resolution up to 5 decimals E 7
- SPC functions
- Measurement transfer by USB or RS232
- PLC programming
Download Files
- Air_Gauging.pdf (3.42 MB)