- Internal Micrometer / Bore Gauge
- Concentricity Gage
- Bench Centre
- Digital Depth Gauge / Depth Caliper
- Digital Calipers
- Go No Go Thread Plug and Ring Gauge
- Master Gear and Spline Gauge
- METRO Digital Display Unit
- Thread Depth Gauge
- ORFEO Packer Measure Block
- TAMLOT Keyway Gauge
- Coating Thickness Gauge
- Metrology Casting Material
- Portable Hardness Tester
- Surface Roughness Tester
Leitech Combi Gauge - Analogue Thread Depth Gauge
|
Leitech Combi Gauge - Analogue Thread Depth Gauge |
The Leitech Combi Gauge represents the basic patented idea in The System Leitech - the capability of measuring both thread quality and thread depth in one single operation.
When the Combi Gauge is screwed in to a thread hole, the scale divided telescope sleeve is pushed up in the handle. The thread depth can then be read directly on the sleeve.
The resolution of the scale on Leitech Combi Gauge System is 0.5 mm/0.025''.
If higher resolution is required, we recommend the Leitech High-Resolution Gauge, which has a measuring accuracy of 0.1 mm/0.005''.
If measurement of depth of the thread hole is not needed – we recommend a Traditional Leitech Gauge.
Maintenance
Replacement of inserts and calibration of depth.
A new gauge in approx. 2 min.!
Please download PDF